Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cca!mirror!datacube!ftw
From: ftw@datacube.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Monitor for ST
Message-ID: <105100017@datacube>
Date: Thu, 10-Sep-87 16:30:00 EDT
Article-I.D.: datacube.105100017
Posted: Thu Sep 10 16:30:00 1987
Date-Received: Sat, 12-Sep-87 18:48:53 EDT
References: <3640@zen.berkeley.edu>
Lines: 14
Nf-ID: #R:zen.berkeley.edu:-364000:datacube:105100017:000:554
Nf-From: datacube.UUCP!ftw    Sep 10 16:30:00 1987


I have seen a description for hooking up the Multiscan to the ST in
Computer Shopper.  This was several months ago, and I probably don't
have the issue anymore.  Basically, it involved a few series resistors
for the R, G, and B lines, and tying the monochrome detect line
high (or was that low?).


				Farrell T. Woods 

Datacube Inc. Systems / Software Group	4 Dearborn Rd. Peabody, Ma 01960
VOICE:	617-535-6644;	FAX: (617) 535-5643;  TWX: (710) 347-0125
UUCP:	ftw@datacube.COM,  ihnp4!datacube!ftw
	{seismo,cbosgd,cuae2,mit-eddie}!mirror!datacube!ftw