Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!mks!wheels
From: wheels@mks.UUCP
Newsgroups: comp.sys.atari.st
Subject: Does ST have address translation?
Message-ID: <300@mks.UUCP>
Date: Fri, 18-Sep-87 10:03:05 EDT
Article-I.D.: mks.300
Posted: Fri Sep 18 10:03:05 1987
Date-Received: Sat, 19-Sep-87 16:09:59 EDT
References: <1665@ncr-sd.SanDiego.NCR.COM> <8381@utzoo.UUCP> <797@Pescadero.ARPA> <723@sugar.UUCP>
Organization: Mortice Kern Systems, Waterloo, Ont.
Lines: 19
Keywords: ST GLUE address translation

This article was in another group, but I've moved it to the atari st group
for obvious reasons...

In article <723@sugar.UUCP>, peter@sugar.UUCP (Peter da Silva) writes:
> > When it's finished, where could one obtain MINIX for the Atari?
> > By the way, I'm quite curious how the fork() call is implemented
> > (the Atari lacks address translation).
> 
> In user mode the GLUE chip adds an offset to all adresses. It's not
> the best memory management hardware ever, but it's enough to make
> MINIX possible.

Does anybody know what this refers to? I know GLUE does a lot of things,
but I hadn't heard about any translation of addresses.
-- 
     ll  // // ,'/~~\' Gerry Wheeler {decvax,ihnp4}!watmath!mks!wheels
    /ll/// //l' `\\\   Mortice Kern Systems Inc.         (519) 884-2251
   / l //_// ll\___/   43 Bridgeport Rd. E., Waterloo, ON, Can. N2J 2J4
O_/