Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ukma!psuvm.bitnet!j5u
From: J5U@PSUVM.BITNET
Newsgroups: comp.sys.ibm.pc,comp.sys.att
Subject: to  Note to burton@parcvax.xerox.com.uucp
Message-ID: <18923J5U@PSUVM>
Date: Mon, 24-Aug-87 18:00:20 EDT
Article-I.D.: PSUVM.18923J5U
Posted: Mon Aug 24 18:00:20 1987
Date-Received: Wed, 26-Aug-87 04:48:08 EDT
Organization: The Pennsylvania State University - Computation Center
Lines: 13
Xref: mnetor comp.sys.ibm.pc:7091 comp.sys.att:1027

I was reading through Usenet, and found a reply to a question that i
had posted concerning connecting a HP LaserJet II to a Ethernet
network Consisting of 21 AT&T 6300's (3 of which are in running as servers)
I am inquiring about what the DMA settings i should use. I am using
3Com 3C501 (halfcards) in all the computers  and am using "thin" ethernet
cable.
     
     
     
     
                                              -Leon-
                                         j5u@psuvm.bitnet