Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!necntc!ames!lll-tis!ptsfa!ihnp4!drutx!dsc
From: dsc@drutx.ATT.COM (DavisCS)
Newsgroups: comp.sys.att,comp.sys.ibm.pc
Subject: AUTOCAD & PC6300+
Message-ID: <5118@drutx.ATT.COM>
Date: Fri, 28-Aug-87 11:31:16 EDT
Article-I.D.: drutx.5118
Posted: Fri Aug 28 11:31:16 1987
Date-Received: Sun, 30-Aug-87 01:56:36 EDT
Distribution: comp
Organization: AT&T, Denver, CO
Lines: 11
Xref: mnetor comp.sys.att:1064 comp.sys.ibm.pc:7230

Problem with AUTCAD and the PC6300+

A friend has been successfully running AUTOCAD on an AT&T PC6300+ with
512k of memory.  After filling out to 1Mb the program will not work.
Does anyone have any ideas as to what the problem may be? Please post
to the net.

Posted for

     Eric Puetz   ...sw013B!epp   (rest of net address unknown)
                  (314) 391-3116   voice