Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!seismo!mcvax!diku!ambush!storm
From: storm@ambush.UUCP
Newsgroups: comp.sys.att
Subject: EPORTS problems on a 3B2/600
Message-ID: <464@ambush.UUCP>
Date: Thu, 27-Aug-87 05:48:44 EDT
Article-I.D.: ambush.464
Posted: Thu Aug 27 05:48:44 1987
Date-Received: Thu, 3-Sep-87 06:06:44 EDT
Organization: AmbraSoft A/S (Denmark)
Lines: 18

We have a modem connected to a port on the new EPORTS module on
our 3B2/600.

It happens quite often that we are unable to use the modem, because
'cu' and 'uucico' cannot access the device.

The problem persists until we execute the following command

	/etc/pump /dev/modem /lib/pump/eports

where /dev/modem is the tty-line to the modem.  After this command,
everything works alright again.

What is going on?  Hints (*spoilers*) will be received with gratitude.

--
Kim F. Storm, storm@ambush.uucp (or ..!mcvax!diku!ambush!storm)
AmbraSoft A/S, Rojelskaer 15, DK-2840 Holte, Denmark.  tel: +45 2424 111