Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!lll-tis!ptsfa!ihnp4!chinet!randy
From: randy@chinet.UUCP
Newsgroups: comp.sys.att,comp.unix.questions
Subject: Re: UUCP dialout, uugetty fighting...
Message-ID: <1463@chinet.UUCP>
Date: Wed, 2-Sep-87 09:29:18 EDT
Article-I.D.: chinet.1463
Posted: Wed Sep  2 09:29:18 1987
Date-Received: Fri, 4-Sep-87 01:40:57 EDT
References: <2896@psuvax1.psu.edu>
Reply-To: randy@chinet.UUCP (Randy Suess)
Distribution: world
Organization: Chinet - Public Access Unix
Lines: 22
Xref: utgpu comp.sys.att:941 comp.unix.questions:3430

In article <2896@psuvax1.psu.edu> jte@psuvax1.psu.edu (Jon Eckhardt) writes:
>I have having a little trouble with uugetty and dialout uucp.
>I have one 2400bps modem, and I wish to have both dialin and
>dialout via the same line.  

	If you are using a Hayes compatible modem, it can't be done without
	some hardware hacks.
	
>The only problem is when I setup
>both niether work and the SD and RD lights on my modem go 
>steady and sytem preformance drops visably.  

	You probably have the modem set up to echo commands or
	status info.  The getty sees this as login info, sends
	prompts to the modem, which thinks it is commands, and on 
	and on.  Be sure to set the modem up completely dumb when
	using it as a login line.

-- 
that's the biz, sweetheart.....
Randy Suess
..!ihnp4!chinet!randy