Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!udel!garrett
From: garrett@udel.EDU (Joel Garrett)
Newsgroups: comp.sys.att,comp.unix.questions
Subject: Re: UUCP dialout, uugetty fighting...
Message-ID: <479@louie.udel.EDU>
Date: Wed, 2-Sep-87 13:31:56 EDT
Article-I.D.: louie.479
Posted: Wed Sep  2 13:31:56 1987
Date-Received: Sat, 5-Sep-87 06:30:51 EDT
References: <2896@psuvax1.psu.edu>
Reply-To: garrett@udel.EDU (Joel Garrett)
Organization: University of Delaware
Lines: 13
Xref: mnetor comp.sys.att:1108 comp.unix.questions:3836

On a line similar to this, I have been trying to use a Courier 2400 as a
dialout modem on a 7300 running v3.5 and have been having the same problem
(the receive and send lights just stay on and I can't get any place).  I
used the Administrative Hardware setup menu to configure the rs232 port for
2400 baud and when I couldn't get it to use the HAYES option for an attached
modem, I tried just telling the config menu that there was a computer attached
to the port and the port was to be used for outgoing calls only.  This config
works fine when you connect the rs232 port to a 3b2/400 and set the baud rate to 9600.  Is there anything that I am missing?  The phone manager manual wasn't
much help.

					Thanks,
					Joel Garrett
					garrett@udel.edu