Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!mtune!westmark!dave
From: dave@westmark.UUCP (Dave Levenson)
Newsgroups: comp.sys.att
Subject: PC6300PLUS Mem Test
Message-ID: <148@westmark.UUCP>
Date: Wed, 2-Sep-87 23:37:39 EDT
Article-I.D.: westmark.148
Posted: Wed Sep  2 23:37:39 1987
Date-Received: Sat, 5-Sep-87 08:23:16 EDT
Organization: Westmark, Inc., Warren, NJ, USA
Lines: 18
Keywords: Extended Memory

I have a PC6300PLUS with 1 Mbyte on the motherboard, and 2 Mbytes on
an AT&T "Enhanced Extended Memory" board.  The memory board comes
with come MS-DOS software that enables a DOS application to use the
extra memory, either as paged (expanded) memory, or as ram-disk, or
as a printer buffer.  It did not include a diagnostic for the board.

The standard diagnostics for the machine (Customer and System
diagnostics) test the memory on the motherboard, but seem to ignore
the expansion board.  They also seem to test the motherboard memory
very quickly when the expansion board is installed, as if the test
is somehow skipping some of the memory.

Does anyone know how one is supposed to test this memory?
-- 
Dave Levenson
Westmark, Inc.		A node for news.
Warren, NJ USA
{rutgers | clyde | mtune | ihnp4}!westmark!dave