Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!cbmvax!fred
From: fred@cbmvax.UUCP (Fred Bowen)
Newsgroups: comp.sys.cbm
Subject: Re: SEQ -> PRG, and how about PRG -> SEQ?
Message-ID: <2312@cbmvax.UUCP>
Date: Fri, 11-Sep-87 11:30:25 EDT
Article-I.D.: cbmvax.2312
Posted: Fri Sep 11 11:30:25 1987
Date-Received: Sat, 12-Sep-87 19:26:29 EDT
References: <5237@j.cc.purdue.edu> <669@uokmax.UUCP> <741@csun.UUCP>
Organization: Commodore Technology, West Chester, PA
Lines: 16

To convert SEQ -> PRG on the C64, the Transactor program that I posted
many moons ago, similar to the one Chris Bingham just posted, works well.

To convert PRG -> SEQ, assuming a BASIC program, simply LOAD the
program, then OPEN 8,8,8,"foo.seq,s,w": CMD8: LIST  followed by the
usual PRINT#8: CLOSE8 when it finishes.

--


-- 
Fred Bowen			uucp:	{ihnp4|rutgers|caip}!cbmvax!fred
				arpa:	beats me
				tele:	215 431-9100

Commodore Electronics, Ltd.,  1200 Wilson Drive,  West Chester,  PA,  19380