Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!hpcea!hpfcdc!hpfcmp!hpfcse!hpuagai!pat
From: pat@hpuagai.HP.COM (Pat Ratanajantra(HP3112))
Newsgroups: comp.sys.hp
Subject: Re: Problem with Bobcats
Message-ID: <100003@hpuagai.HP.COM>
Date: Sun, 13-Sep-87 00:11:45 EDT
Article-I.D.: hpuagai.100003
Posted: Sun Sep 13 00:11:45 1987
Date-Received: Fri, 18-Sep-87 06:45:38 EDT
References: <605@uoregon.UUCP>
Organization: Hewlett-Packard
Lines: 6

Make sure your /dev/locator is linked to the correct /dev/hil_ device.
(ie. if your mouse is the 4th hil device on the hil chain, the /dev/locator
must be linked to /dev/hil4 using command 'ln /dev/hil4 /dev/locator')
If this does not help, let's hope the gurus response to your request.

Pat R.