Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!sri-unix!rutgers!bellcore!wind!hundt
From: hundt@wind.bellcore.com (tom hundt)
Newsgroups: comp.sys.ibm.pc
Subject: 386 motherboard, and 387
Message-ID: <2245@bellcore.bellcore.com>
Date: Fri, 28-Aug-87 17:48:34 EDT
Article-I.D.: bellcore.2245
Posted: Fri Aug 28 17:48:34 1987
Date-Received: Sun, 30-Aug-87 03:29:41 EDT
Sender: news@bellcore.bellcore.com
Reply-To: hundt@wind.UUCP (tom hundt)
Distribution: na
Organization: Bellcore, Morristown, NJ
Lines: 12
Keywords: Is 387 square or DIP?

>>You can try Intel but your best bet is probably Cheetah International.  They
>>have either the 16Mhz or 20Mhz motherboards.  Try them at 1-800-CHEETAH.
>
>...but make sure - as it, get it in writing - that they will accept
>the 80387 chip. Even Intel's earlier motherboards won't.

Is the 80387 packaged the same as the 80287 (40 pin DIP)?  Or is it
a square chip-carrier package?  (If so, just look at the empty socket.)

 /-^-\  Thomas M. Hundt / BELLCORE Morristown NJ / hundt@bellcore.bellcore.com
 |   |  {seismo|ihnp4|ucbvax|decvax|ulysses|allegra|clyde}!bellcore!hundt
/--_--\