Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ucla-cs!zen!ucbcad!ames!amdcad!sun!texsun!convex!authorplaceholder
From: cuddy@convex.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: "inline code with Turbo Pascal"
Message-ID: <63200006@convex>
Date: Sun, 23-Aug-87 04:20:00 EDT
Article-I.D.: convex.63200006
Posted: Sun Aug 23 04:20:00 1987
Date-Received: Sun, 30-Aug-87 05:26:51 EDT
References: <3391@ece-csc.UUCP>
Lines: 14
Nf-ID: #R:ece-csc.UUCP:-339100:convex:63200006:000:448
Nf-From: convex.UUCP!cuddy    Aug 23 03:20:00 1987


> I am looking for an easy way to produce inline code for TP from
> assembly listings (without using MS MASM).

	There is a public domain program called INLINER  available
from PC-SIG public domain library (about $6.00 for the disk from
them.)  To find out what disk it's on, go to your friendly
neighborhood (sp?) book store and look in thier catalog... (THE PC-SIG
BOOK or something like that...)

Hope It helps...

Mike Cuddy
inhp4!convex!cuddy