Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!dcatla!ittfb
From: ittfb@dcatla.UUCP (Thomas F. Blakely)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Using 8 inch floppies on an AT compatible
Message-ID: <1057@dcatla.UUCP>
Date: Thu, 3-Sep-87 08:03:35 EDT
Article-I.D.: dcatla.1057
Posted: Thu Sep  3 08:03:35 1987
Date-Received: Sat, 5-Sep-87 10:35:20 EDT
References: <2211@batcomputer.tn.cornell.edu> <777@custom.UUCP>
Reply-To: ittfb@dcatla.UUCP (Thomas F. Blakely)
Organization: DCA Inc., Alpharetta, GA
Lines: 16

In article <777@custom.UUCP> boykin@custom.UUCP (Joseph Boykin) writes:
>In article <2211@batcomputer.tn.cornell.edu>, sparks@batcomputer.tn.cornell.edu (Steve Gaarder) writes:
>> I'm looking for a way to connect a Shugart SA810 half-height single-side
>> 8 inch floppy to an HP Vectra (AT compatible) for the purpose of reading

>were a few companies who produced an 8" controller for the PC.  The
>only one I remember is Maynard electronics.  I recently looked at

I have one of these, as well as the Tall Trees device driver software
if anyone is interested.  I also have several 8" drives, both single
and double sided.  This stuff is "as-is" as I haven't used it in years
and have no interest in testing it.  Price:  cheap (make offer).

Tom Blakely
(404)442-4866
{gatech, sun!sunatl}!dcatla!ittfb