Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!epiwrl!parker
From: parker@epiwrl.EPI.COM (Alan Parker)
Newsgroups: comp.sys.ibm.pc
Subject: Re: hh hd's in a z-150
Message-ID: <1576@epiwrl.EPI.COM>
Date: Wed, 9-Sep-87 16:42:44 EDT
Article-I.D.: epiwrl.1576
Posted: Wed Sep  9 16:42:44 1987
Date-Received: Fri, 11-Sep-87 05:14:50 EDT
References: <255@auscso.UUCP>
Reply-To: parker@epiwrl.EPI.COM (Alan Parker)
Organization: Entropic Processing, Inc., Washington, DC
Lines: 6

I have a half-height hard disk in a z-150.  Works just fine.  On some
drives (I've had several) you have to remove the front bezel to get it
to fit the lower section and leave room for two diskette drives.

I got it from Micro Design International (in Fla somewhere).  They
adverstise in Byte and other mags.