Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!ll-xn!husc6!cmcl2!beta!myxm
From: myxm@beta.UUCP (Mike Mitchell)
Newsgroups: comp.sys.ibm.pc
Subject: Poking for High Speed on a Turbo Board
Message-ID: <10008@beta.UUCP>
Date: Sun, 13-Sep-87 19:32:39 EDT
Article-I.D.: beta.10008
Posted: Sun Sep 13 19:32:39 1987
Date-Received: Sun, 13-Sep-87 23:36:50 EDT
Organization: Los Alamos Natl Lab, Los Alamos, N.M.
Lines: 15

Does anyone have any pertinent information on what port and values
are needed to make a Turbo AT board toggle between high and low
speeds?

Specifically I am working with a board that says "Made in Tiawan" and
it has the Phoenix BIOS on it. I can toggle between high and low with
the CTRL-ALT-KEYPADMINUS combination. This is an unaceptable solution
when the machine is running Xenix though... I am not real hot on the
idea of moving the jumpers for the higher speed.

Thanx for the info.

Mike Mitchell
myxm@lanl.gov
...!cmcl2!lanl!myxm