Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ames!amdahl!nsc!voder!wlbr!pete
From: pete@wlbr.EATON.COM (Pete Lyall)
Newsgroups: comp.sys.m6809
Subject: Re: transient errors
Message-ID: <1121@wlbr.EATON.COM>
Date: Thu, 27-Aug-87 16:50:33 EDT
Article-I.D.: wlbr.1121
Posted: Thu Aug 27 16:50:33 1987
Date-Received: Sat, 29-Aug-87 12:35:28 EDT
References: <690@cblpf.ATT.COM>
Reply-To: pete@wlbr.UUCP (0000-Pete Lyall)
Organization: Eaton IMS, Westlake Village, CA
Lines: 20
Keywords: OS9

In article <690@cblpf.ATT.COM> mdk@cblpf.ATT.COM (59261-Mike King-x5693) writes:
>To all you OS9 Gurus out there,
>
>While working with OS9 Level 2 on my CoCo3, I occasionally get CRC errors
>when I pack a Basic09 file and also when I copy a compiled C program into
>my /d0/cmds directory. ..... 

Hmm - what *kind* of CRC errors?? Module CRC's or sector CRC's?? If
the latter, there have been scores of problems associated with running
older type disk controllers at the 2MHZ rate.. Also, you might want to
swap drives (pardon the simplicity in that, but you did explicitly
refer to /d0/cmds in both cases..). Also assumed you've upgraded your
multipak with the new PAL..


-- 
                                                   Pete Lyall

Usenet:     {trwrb, scgvaxd, ihnp4, voder, vortex}!wlbr!pete
Compuserve: 76703,4230 (OS9 Sysop) OS9 (home): (805)-985-0632 (24hr./1200 baud)