Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ucla-cs!cit-vax!tybalt.caltech.edu!wetter
From: wetter@tybalt.caltech.edu.UUCP
Newsgroups: comp.sys.mac
Subject: Re: Flames about Multifinder
Message-ID: <3866@cit-vax.Caltech.Edu>
Date: Wed, 2-Sep-87 18:24:49 EDT
Article-I.D.: cit-vax.3866
Posted: Wed Sep  2 18:24:49 1987
Date-Received: Fri, 4-Sep-87 04:33:21 EDT
References: <7177@steinmetz.steinmetz.UUCP>
Sender: news@cit-vax.Caltech.Edu
Reply-To: wetter@tybalt.caltech.edu.UUCP (Pierce T. Wetter)
Organization: California Institute of Technology
Lines: 23

As to the memory requirements of HyperCard:

  In my own experience, HC memory requirements only get larger as your user
level gets higher. Just flitting between cards requires < 1M ; Turning
on paint tools requires at little more and turning on paint tools, power keys,
authoring, and scripting requires the most. It is in the latter that you
begin to see the out of memory for painting message.

   Also, do you have HC 1.0 or HC 1.01?   HC 1.01 is the official release,
HC 1.0 is the almost officail release.

   For those of you with MultiFinder you can check HC's Memory use by watching
the barchart in the about finder window change.

  Pierce Wetter
God made the Idiot for practice, and then He made the School Board
		-- Mark Twain

--------------------------------------------

wetter@tybalt.caltech.edu

--------------------------------------------