Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!labrea!jade!violet.berkeley.edu!campoly
From: campoly@violet.berkeley.edu (Mr. Science)
Newsgroups: comp.sys.mac
Subject: Re: Mac files to Postscript printer
Message-ID: <4989@jade.BERKELEY.EDU>
Date: Fri, 4-Sep-87 03:37:09 EDT
Article-I.D.: jade.4989
Posted: Fri Sep  4 03:37:09 1987
Date-Received: Sat, 5-Sep-87 17:09:29 EDT
References: <880@hao.UCAR.EDU>
Sender: usenet@jade.BERKELEY.EDU
Reply-To: campoly@violet.berkeley.edu (Mr. Science)
Organization: University of California, Berkeley
Lines: 41
Keywords: Ethernet, macput, macget, UNIX

In article <880@hao.UCAR.EDU> bill@hao.UCAR.EDU (Bill Roberts) writes:
>
>  I was wondering if anyone knows how to transfer a file from a Mac to a 
>Postscript printer tied into an Ethernet.  I've got macget and macput (I don't
>recall which one does the uploading).  I can upload a Mac file to UNIX and find
>it broken down into three components: .rsrc, .info, .data.
>  It seems like it ought to be possible to recombine the forks and build a
>Mac file in the UNIX environment and send that Mac file to a Postscript Laser
>printer.
>  Has anyone done anything like this?  Thanks for any input on this issue.
>
>--Bill

If you're going to print out a file from the Mac, I assume that it is a
text file and not a binary file (text file could be a PostScript program).
In this case, you should use the -u option with macget (on UNIX, macget
"gets" a file from the Mac, macput "puts" a file on to the Mac).  This 
option specifies UNIX mode, which uploads a text file converting carriage
returns into UNIX newline characters and giving the uploaded file a
suffix of .text (you get just this one file).

Procedure:
	On UNIX, enter the command    macget -u

	On Mac, send file xxxx using MacTerminal protocol

	The file is uploaded to UNIX and is given the name xxxx.text

More thoughts --
	If you want to print a Mac document, you should first create a
PostScript file on the Mac before uploading.  (Hold down Command-F or
Command-K while selecting OK from Print Dialog Box -- Command_k gives you the
Laser Prep header in addition the stuff for your document).  Make sure
that your PostScript printer can handle a Mac PostScript program.  The
DataProducts Laser Printer that we have here has a PostScript Driver but
can't handle Mac Stuff (seems that the Mac uses some special features
relating to fonts that this printer doesn't support).

Hope this helps.

					-- Greg