Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!ut-sally!husc6!bloom-beacon!oberon!sdcrdcf!ism780c!darryl
From: darryl@ism780c.UUCP (Darryl Richman)
Newsgroups: comp.sys.mac
Subject: Re: Hypercard lossage
Message-ID: <7233@ism780c.UUCP>
Date: Tue, 8-Sep-87 13:31:05 EDT
Article-I.D.: ism780c.7233
Posted: Tue Sep  8 13:31:05 1987
Date-Received: Thu, 10-Sep-87 05:27:00 EDT
References: <1017@vi.ri.cmu.edu> <2795@husc6.UUCP> <1018@vi.ri.cmu.edu>
Reply-To: darryl@ism780c.UUCP (Darryl Richman)
Organization: Interactive Systems Corp., Santa Monica CA
Lines: 15
Keywords: hypercard

In article <1018@vi.ri.cmu.edu> rwb@vi.ri.cmu.edu (Bob Berger) writes:
<The problem WAS NOT the stack. I had already tried that. In my
<copy of Hypercard (1.01), sending dial "#" directly to Hypercard
<produces no sound at all. I had already tried the obvious tricks
<of sending directly to Hypercard or modifying the phone stack. They
<do not work.

I played with this over the weekend and discovered that dialing '#' or
'*' does not produce a tone from the Mac speaker.  However, they DO
produce tones through my modem, when the dialer stack is set to modem.

-- 
Copyright (C) 1987 Darryl Richman	INTERACTIVE Systems Corporation
    The views expressed above are	...!cca!ima!ism780c!darryl
	     those of the author.	...!sdcrdcf!