Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!ut-sally!im4u!rutgers!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!well!mo
From: mo@well.UUCP (Maurice Weitman)
Newsgroups: comp.sys.mac
Subject: Re: SASI disk to Mac (Help Wanted)
Message-ID: <3925@well.UUCP>
Date: Wed, 9-Sep-87 23:54:20 EDT
Article-I.D.: well.3925
Posted: Wed Sep  9 23:54:20 1987
Date-Received: Sat, 12-Sep-87 06:28:06 EDT
References: <468@tnosel.UUCP>
Reply-To: mo@well.UUCP (Maurice Weitman)
Organization: The Maurizio T. Butthead Computing Companies
Lines: 25
Keywords: SASI, SCSI, Hard Disk, Problems, Why?

hvt@tnosel.UUCP (henq) writes:
=We connected an old  Xebex S1410 SASI controller and a
=CMI CM5619 19MB (unformatted) hard disk to an Macintosh SE HD. 
=[...]
=After quitting the programming the drive was mounted and an icon showed
=up on the desktop of the finder.  We copied files to it and everything seemed
=to work just fine.
=
=But... when we tried Apple utility 'Apple HD SC Setup' it didn't recognize
=the drive, and when we rebooted the Mac, the drive would not mount.
=The disk seems to be recognized only directly after formatting with SF&I.
[...]

Henk and Marcel, I may be interpreting your information
incorrectly , but I think there are two problems with using
Apple HD SC Setup:  first, it won't recognize a mounted device,
and second, since you've probably got version 1.3, it looks for
Apple's signature in the drive's ROM.  Try getting version 1.1;
that should work.

-- 
Maurice Weitman           ..!{dual,hplabs,lll-crg,ptsfa,glacier}!well!mo
 | <- this is not a pipe   POBox 10019 Berkeley, CA  94709  (415)549-0280
Quote:  "I am this groping intensity that is a soul." Jorge Luis Borges     
Disclaimer:  Any errors in spelling, tact or fact are transmission errors.