Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!think!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!hp-pcd!uoregon!omepd!littlei!ogcvax!afoster
From: afoster@ogcvax.UUCP (Allan Foster)
Newsgroups: comp.sys.mac
Subject: Re: NTSC from Mac II?
Message-ID: <1414@ogcvax.UUCP>
Date: Sat, 12-Sep-87 12:02:14 EDT
Article-I.D.: ogcvax.1414
Posted: Sat Sep 12 12:02:14 1987
Date-Received: Tue, 15-Sep-87 03:57:56 EDT
References: <4314@oberon.USC.EDU> <2801@husc6.UUCP> <1033@omepd> <husc6.2818>
Reply-To: afoster@ogcvax.UUCP (Allan Foster)
Distribution: na
Organization: Oregon Graduate Center, Beaverton, OR
Lines: 22

Let me clarify some confusion here.

Pat Mead mentioned that someone in the user group hacked together
an init to run NTSC.  Someone also wrote a cdev to do it.
That someone was the same person .... ME.

The cdev and the INIT were the same thing, as the cdev was
used to configure the init.  As cdev's are also loaded
as INIT's are at boot time it works fine.

The problem about frying the monitor happens anyway
as the init takes a few seconds to actually happen
so before this there is a time of frying experience!!!

I have posted the source for changing the video to NTSC and
back.  If there is enough demand I will also post the cdev
Ahhh what the hell, I will post the cdev anyway.

Regards Allan


#include "std_disclaimers"