Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!uw-beaver!ssc-vax!voodoo!bcsfse!bill
From: bill@bcsfse.UUCP (Bill Sears)
Newsgroups: comp.sys.misc,comp.arch
Subject: Using the SCSI interface
Message-ID: <126@bcsfse.UUCP>
Date: Mon, 24-Aug-87 16:01:23 EDT
Article-I.D.: bcsfse.126
Posted: Mon Aug 24 16:01:23 1987
Date-Received: Sun, 13-Sep-87 09:48:05 EDT
Reply-To: bill@bcsfse.UUCP (Bill Sears)
Organization: bcs
Lines: 18
Xref: mnetor comp.sys.misc:804 comp.arch:2153


    I have two computers each with a SCSI interface.  I am interested in
connecting the computers using the SCSI interface and I need some information
on what is needed to accomplish this (or if it is even possible).  I am mainly
concerned about the complexity of the hardware needed.  I am an experienced C
programmer so I am not too worried about the software side (although maybe I 
should be :-).
	I would appreciate any direct help or reference material.  Please respond
via E-mail or netnews (I have cross-posted this article but followups probably
should not be).
	If it is necessary, the machines involved are:
		1)  Amiga 1000 (I understand that a SCSI interface is available and
			will probably upgrade to 2000 soon anyhow).
		2)  Megadata 8300-7  (A 68000 based UNIX system V box).
-- 
	Bill Sears            ...!uw-beaver!ssc-vax!voodoo!bcsfse!bill
			FSE development project
    All I ask of life is a constant and exaggerated sense of my own importance.