Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!aurora!labrea!decwrl!sun!pitstop!texsun!convex!trsvax!authorplaceholder
From: earl@trsvax.UUCP
Newsgroups: comp.sys.tandy
Subject: Switch 68k to 68010
Message-ID: <193300023@trsvax>
Date: Fri, 28-Aug-87 09:32:00 EDT
Article-I.D.: trsvax.193300023
Posted: Fri Aug 28 09:32:00 1987
Date-Received: Sat, 19-Sep-87 11:39:45 EDT
Lines: 28
Nf-ID: #N:trsvax:193300023:000:816
Nf-From: trsvax.UUCP!earl    Aug 28 08:32:00 1987




   I want to replace my 68000 chip with a 68010 chip in my Tandy 68000 Xenix
   machine.

   Does anyone know what modifications are needed to make the switch work?

   Normally, a changeover from 68000 to 68010 is simply plugging in a new chip.
   But there are a couple of pins that have to be taken care of on the Tandy
   boards.

   Thanks.


***********************************************************************


<This information is provided by an individual and is not nor should be
 construed  as  being  provided  by  Radio  Shack or Tandy Corp.  Radio
 Shack/Tandy Corp has no obligation to support the information provided
 in  any way. > 
						
						Earl W. Bollinger
						@ <trsvax!earl>

                                                912 West First Street, #5
						Fort Worth, Texas 76102