Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!phri!roy
From: roy@phri.UUCP (Roy Smith)
Newsgroups: comp.text,comp.unix.questions
Subject: Re: Proper 4.3BSD printcap entry for Laserwriter
Message-ID: <2884@phri.UUCP>
Date: Sat, 29-Aug-87 15:13:56 EDT
Article-I.D.: phri.2884
Posted: Sat Aug 29 15:13:56 1987
Date-Received: Sun, 30-Aug-87 09:24:59 EDT
References: <643@noao.UUCP>
Reply-To: roy@phri.UUCP (Roy Smith)
Organization: Public Health Research Inst. (NY, NY)
Lines: 28
Xref: mnetor comp.text:1124 comp.unix.questions:3785

In article <643@noao.UUCP> grandi@noao.arpa (Steve Grandi) writes:
> How does one set up a proper /etc/printcap for an Apple Laserwriter on a
> 4.3BSD system?

	Here's what we've been using for the past couple of years.  This
works fine for us using Adobe's pscomm (part of the transcript package) to
do the low-level communication with the printer.  We've used essentially
the same printcap entry on 4.2BSD, 4.3BSD, Sun-3.0 and Sun-3.2 systems.

# Apple LaserWriter in room 1074
laser10|laser|postscript|PostScript:\
	:lp=/dev/laser:br#9600:\
	:fs#0000003:fc#0000374:\
	:xs#0040040:xc#0000000:\
	:pl#66:pw#80:\
	:mx#0:\
	:rw:sf:sb:\
	:sd=/usr/spool/laser10:\
	:af=/usr/adm/lpd/laser10.acct:lf=/usr/spool/laser10/laser-log:\
	:if=/usr/lib/ps/psif:\
	:of=/usr/lib/ps/psof:gf=/usr/lib/ps/psgf:\
	:nf=/usr/lib/ps/psnf:tf=/usr/lib/ps/pstf:\
	:rf=/usr/lib/ps/psrf:vf=/usr/lib/ps/psvf:\
	:cf=/usr/lib/ps/pscf:df=/usr/lib/ps/psdf:
-- 
Roy Smith, {allegra,cmcl2,philabs}!phri!roy
System Administrator, Public Health Research Institute
455 First Avenue, New York, NY 10016