Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!mtune!codas!flmis06!mikel
From: mikel@flmis06.ATT.COM (Mikel Manitius)
Newsgroups: comp.unix.questions
Subject: Re: Honey Danber UUCP for System V
Message-ID: <80@flmis06.ATT.COM>
Date: Wed, 2-Sep-87 14:34:30 EDT
Article-I.D.: flmis06.80
Posted: Wed Sep  2 14:34:30 1987
Date-Received: Sat, 5-Sep-87 06:42:41 EDT
References: <26769@sun.uucp>
Organization: AT&T, Altamote Springs, FL
Lines: 17

> Does one need source to install it?

Not if you're installing it on a 3B product (that includes the 3B1),
you purchase the floppy or tape for BNU (Basic Networking Utilities).
The release contains only the binaries. Source is available, but you
will need a source license, and then you get the entire source.

HDB (aka BNU) is available for SVR2 and up.

>> Where does one get it?
> 
> From AT&T, or from whoever supplied your S5R2.

If you're getting it from AT&T, the number to call is 800 247-1212.
-- 
				Mikel Manitius @ AT&T Network Operations
				mikel@codas.att.com.uucp | attmail!mikel