Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!columbia!rutgers!umnd-cs!umn-cs!randy
From: randy@umn-cs.UUCP (Randy Orrison)
Newsgroups: comp.unix.wizards
Subject: Version 7 on Wicat
Message-ID: <2134@umn-cs.UUCP>
Date: Fri, 28-Aug-87 19:14:27 EDT
Article-I.D.: umn-cs.2134
Posted: Fri Aug 28 19:14:27 1987
Date-Received: Sun, 30-Aug-87 05:58:24 EDT
Reply-To: randy@umn-cs.UUCP (Randy Orrison)
Distribution: na
Organization: UofM Math Department
Lines: 19

I'm trying to bring up V7 on my Wicat 150 with a 39M disk.  The disk was
tested with UniSofts Sys5 verify and came out ok, and was in use for a long
time with Sys5 with no major problems, so I know it's in good shape.
However, badblk in V7 reports continuous badblocks starting at about
66000+ (of 87000), so many that the program eventually dumps core (so I
can't map them out).  Other V7 programs (fsck) also report bad blocks out
at the high end, so I can't get it installed.  Has anyone out there had
any experience with this system?

(I apologize for the incoherency, if anyone understands and can help, let
me know by e-mail!)

	Thanks!!!
		-randy
-- 
Randy Orrison, University of Minnesota School of Mathematics
UUCP:	{ihnp4, seismo!rutgers!umnd-cs, sun}!umn-cs!randy
ARPA:	randy@ux.acss.umn.edu		 (Yes, these are three
BITNET:	randy@umnacvx			 different machines)