Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!mcnc!ece-csc!ncrcae!ncr-sd!ivory!mike
From: mike@ivory.SanDiego.NCR.COM (Michael Lodman)
Newsgroups: comp.unix.xenix
Subject: df, dos
Message-ID: <174@ivory.SanDiego.NCR.COM>
Date: Wed, 26-Aug-87 19:58:09 EDT
Article-I.D.: ivory.174
Posted: Wed Aug 26 19:58:09 1987
Date-Received: Sat, 29-Aug-87 06:21:05 EDT
Reply-To: mike@ivory.UUCP (Michael Lodman)
Organization: NCR Corporation - Advanced Development
Lines: 21

I am using SCO Xenix 2.1.3. I am experiencing two problems.

1. I have a floppy mounted as a file system on /dev/fd096ds15. It works 
fine. When I do a 'df', it says that it can't get that data from fd096ds1<-see.
Is this a known bug, or am I doing something wrong.

2. The dos commands refuse to read the 30Meg type20 drive in the D: slot.
They say that the fat is unrecognizeable. CHKDSK under dos reports a ok
disk. What is the problem here? I have no trouble reading the dos
partition on the xenix drive, and I can read dos floppies fine.

Thanks for the help!


-- 
Michael Lodman  (619) 485-3335
Advanced Development NCR Corporation E&M San Diego
mike.lodman@ivory.SanDiego.NCR.COM 
{sdcsvax,cbatt,dcdwest,nosc.ARPA,ihnp4}!ncr-sd!ivory!lodman

When you die, if you've been very, very good, you'll go to ... Montana.