Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!munnari!otc!metro!ipso!astra!dave
From: dave@astra.necisa.oz (Dave Horsfall)
Newsgroups: comp.unix.xenix
Subject: Termcap delays
Message-ID: <248@astra.necisa.oz>
Date: Wed, 9-Sep-87 21:26:39 EDT
Article-I.D.: astra.248
Posted: Wed Sep  9 21:26:39 1987
Date-Received: Sat, 12-Sep-87 16:07:04 EDT
Reply-To: dave@astra.necisa.oz (Dave Horsfall)
Organization: NEC Information Systems Australia, Sydney, AUSTRALIA
Lines: 14

H'lo all...  (Usual disclaimer about sorry if this was already asked etc)

There appears to be a slight problem with SCO Xenix 2.2, on an AT clone.
Basically, it appears to be ignoring the delay specification in /etc/termcap,
and manifests itself as cursor positioning commands screwing up when talking
to VT220's etc on the COM ports.

Any ideas?  Bug fixes etc?
-- 
Dave Horsfall  (VK2KFU)             ACSnet/CSNET: dave@astra.necisa.oz
NEC Information Systems Aust.       ARPA: dave%astra.necisa.oz@uunet.uu.net
3rd Floor, 99 Nicholson St          JANET: astra.necisa.oz!dave@ukc
St. Leonards NSW 2064  AUSTRALIA    UUCP: {enea,hplabs,mcvax,uunet,ukc}!\
TEL: +61 2 438-3544  FAX: 439-7036         munnari!astra.necisa.oz!dave