Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!mcvax!ukc!stc!root44!miduet!misoft!adam
From: adam@gec-mi-at.co.uk (Adam Quantrill)
Newsgroups: sci.electronics
Subject: Re: Decoding of DAT player "digital in/out"
Message-ID: <656@gec-mi-at.co.uk>
Date: Fri, 11-Sep-87 07:25:07 EDT
Article-I.D.: gec-mi-a.656
Posted: Fri Sep 11 07:25:07 1987
Date-Received: Tue, 15-Sep-87 01:49:21 EDT
References: <15368@onfcanim.UUCP> <193@nikhefk.UUCP>
Sender: news@gec-mi-at.co.uk
Reply-To: adam@gec-mi-at.co.uk (Adam Quantrill)
Organization: Marconi Instruments Ltd., St. Albans, UK
Lines: 14

In article <193@nikhefk.UUCP> henkp@nikhefk.UUCP (Henk Peek) writes:
<In article <15368@onfcanim.UUCP> dave@onfcanim.UUCP (Dave Martindale) writes:
<|I'm looking for information on how to extract the data from the
<|signal that is fed to the "digital output" jack of my Philips (Magnavox)
<|CDB 650 CD player.
<|[]
<The digital audio output consists of 32 bit words transmitted in
<biphase-mark code. []

Are there any similar standards for the forthcoming DAT players?
Any detailed format info would be appreciated.
       -Adam.

/* If at first it don't compile, kludge, kludge again.*/