Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!oldeng
From: oldeng@utgpu.UUCP
Newsgroups: tor.general
Subject: Memory installation in a VAX 730
Message-ID: <1987Sep17.133416.17408@gpu.utcs.toronto.edu>
Date: Thu, 17-Sep-87 13:34:16 EDT
Article-I.D.: gpu.1987Sep17.133416.17408
Posted: Thu Sep 17 13:34:16 1987
Date-Received: Sat, 19-Sep-87 05:15:03 EDT
Reply-To: oldeng@gpu.utcs.toronto.edu
Distribution: tor
Organization: Dictionary of Old English - University of Toronto, CANADA
Lines: 29
Keywords: Vax 730, memory boards, installation thereof.
Checksum: 43430



We are trying to install two 1 MByte memory boards in our VAX 11/730.  

Is there anyone out there that knows anything about this?

There are a few things that we don't know.  Such as, do the boards have to be
in any particular slots?  Do they have to be in adjacent slots, or can they
be scattered?  Must we reconfigure something, or does the VAX recognize the
presence of the boards automatically?  Also, how much of a shutdown do we
have to do?  I will turn the keyswitch to OFF, but should I also throw the
power supply switch (marked with 0 and 1, visible when you pull the VAX
assembly out.)  Or should I unplug the Vax?

Please reply, preferably by E-mail, to oldeng@gpu.utcs.toronto.edu.

Thanks in advance.

--Tak Ariga

-- 
---------------------------------------------------------------------------
Internet:  amos@csri.toronto.edu
	   oldeng@gpu.utcs.toronto.edu
BITNET:    oldeng@UTORGPU
Phone:     (416) 978-8883 {office}

++ Dictionary of Old English == University of Toronto == Toronto, Canada ++
---------------------------------------------------------------------------