Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!sri-spam!mordor!lll-tis!ptsfa!ihnp4!homxb!mtuxo!mtune!codas!killer!ozdaltx!bill
From: bill@ozdaltx.UUCP (Tic-Toc's battery is run down)
Newsgroups: comp.os.misc,comp.os.cpm
Subject: 8 bit S-100 update to 16 or 32 bit
Message-ID: <4347@ozdaltx.UUCP>
Date: Tue, 6-Oct-87 10:06:03 EDT
Article-I.D.: ozdaltx.4347
Posted: Tue Oct  6 10:06:03 1987
Date-Received: Sun, 11-Oct-87 01:48:52 EDT
Organization: OZ BBS - Dallas, TX
Lines: 8
Xref: mnetor comp.os.misc:277 comp.os.cpm:918

I am looking for information and suggestions for upgrading my IMS
8000 system to either 16 or 32 bit operation.  Cost being the
main factor.  This is an older, non DMA machine with 3 full size
Qume DT-8 drives and an 8" 40 meg hard disk.  I know that I would
probably have to dump all of these, and start fresh with all new
boards.   Any Suggestions?   

BTW, this is a IEE-696 system.