Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ucla-cs!zen!ucbvax!DHHDESY3.BITNET!F31HEI
From: F31HEI@DHHDESY3.BITNET.UUCP
Newsgroups: comp.os.vms
Subject: Error INSVIRMEM
Message-ID: <8709192235.AA10931@ucbvax.Berkeley.EDU>
Date: Sat, 19-Sep-87 18:35:48 EDT
Article-I.D.: ucbvax.8709192235.AA10931
Posted: Sat Sep 19 18:35:48 1987
Date-Received: Sun, 20-Sep-87 16:21:13 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 22


After defining many logicals (>30) in systartup.com and sylogin.com
I have the problem that the command
  SHOW LOGICAL
won't work. It gives the error message:
  %LIB-F-INSVIRMEM, insufficient virtual memory
I searched the system messages manual, but can't find this message
with the Facility LIB.

We are working on a uVAX II VAX-Station under VMS 4.5/WS V3.0 with
9MByte Memory.
In SYSGEN the VIRTUALPAGECNT Parameter is set to
Current=50000,default=8192,minimum=512,maximum=300000 pages
Setting it to 300000 does not help.
System page file is 20000 block, swap file is 6000 blocks.
Also there are parameters PGFLQOUTA and WSQUOTA. Since I'm totally
new in system management on a VAX I have no idea which parameter
I have to change. Any help to this problem is welcome, please
send answers direct to
Bitnet address:  F31HEI@DHHDESY3
or to INFO-VAX, if you can't reach me.
Thanks in advance, F.-H. Heinsius