Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ucla-cs!zen!ucbvax!decvax!tektronix!cae780!bdcsccs
From: bdcsccs@cae780.UUCP
Newsgroups: comp.os.vms
Subject: Re:  Error INSVIRMEM
Message-ID: <4521@cae780.TEK.COM>
Date: Tue, 22-Sep-87 14:41:08 EDT
Article-I.D.: cae780.4521
Posted: Tue Sep 22 14:41:08 1987
Date-Received: Fri, 25-Sep-87 05:52:28 EDT
References: <8709191254.AA03963@ucbvax.Berkeley.EDU>
Reply-To: bdcsccs@cae780.UUCP (Boston SCCS)
Distribution: world
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 26






>After defining many logicals (>30) in systartup.com and sylogin.com     00000100
>I have the problem that the command                                     00000200
>  SHOW LOGICAL                                                          00000300
>won't work. It gives the error message:                                 00000400
>  %LIB-F-INSVIRMEM, insufficient virtual memory                         00000500
>I searched the system messages manual, but can't find this message      00000510
>with the Facility LIB.                                                  00000520
>	...
>
>
We had a similar problem to this a while ago. The solution was to raise
the (undocumented) sysgen parameter CTLPAGES. On our b+w VAXStations,
we keep CLTPAGES at 500; on a gpx ,it's at 900.

Hope this helps.

Charlie Way
CAE Systems Div. Tektronix
482 Bedford Street
Lexington, MA 02173
(617)861-5868