Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucbvax!DHDMPI5.BITNET!KND From: KND@DHDMPI5.BITNET Newsgroups: comp.os.vms Subject: (none) Message-ID: <8709260013.AA22223@ucbvax.Berkeley.EDU> Date: Fri, 25-Sep-87 20:13:47 EDT Article-I.D.: ucbvax.8709260013.AA22223 Posted: Fri Sep 25 20:13:47 1987 Date-Received: Sun, 27-Sep-87 05:39:36 EDT Sender: daemon@ucbvax.BERKELEY.EDU Distribution: world Organization: The ARPA Internet Lines: 37 Date: Thu, 24 Sep 87 14:01:07 n To: INFO-VAX@KL.SRI.COM From: Organisation: MPI fuer Kernphysik Postal-address: Saupfercheckweg, 6900 Heidelberg, W. Germany Phone: (6221)516-1 [switchboard] Subject: RSX11M Question Header-Disclaimer: I don't like my headers either ! this is no vax related question, but i think there are also RSX11 gurus on this list... i want to use a DHU11 multiplexer terminal interface to connect 1. other computers via an async DECNET link and 2. 'normal' terminals when i want to start the line and circuit with ncp, i get a message saying that the interrupt vector is already in use. that's true because the terminal driver has already control over the dhu11. it doesn't help to configure the appropriate terminal line offline like in con> offline tt20: DEC TSC here in germany says that it's impossible to run both - decnet and the terminal driver for the same DHU11 controller. we run RSX11M Plus V3.0 with DECNET + V3.0 Could anybody help ? Hans Kandler ########################################################################### Post-Mail-Address * E-Mail ------------------------------- * -------------------------------------- Hans Kandler * DATEX-P PSI%02624562219303::KND Max-Planck-Institut * fuer Kernphysik * Bitnet / Earn KND@DHDMPI5 Postfach 1o398o * Bitnet / Earn KND@DHDMPI5V D-69oo Heidelberg * SPAN HERING::KND (28.22o) GERMANY * ###########################################################################