Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!genrad!decvax!minow
From: minow@decvax.UUCP (Martin Minow)
Newsgroups: comp.os.vms
Subject: Re: PC <--> DECtalk <--> DECserver <--> VAX problem
Message-ID: <166@decvax.UUCP>
Date: Tue, 6-Oct-87 22:56:35 EDT
Article-I.D.: decvax.166
Posted: Tue Oct  6 22:56:35 1987
Date-Received: Sat, 10-Oct-87 05:36:13 EDT
References: <3rrk@byuvax.bitnet>
Reply-To: minow@decvax.UUCP (Martin Minow)
Organization: Digital Eq. Corp. - Merrimack NH.
Lines: 19

Two collegues have discovered to their dismay that DECtalk logs
a CTRL/K <VT> to the local terminal and wondered how to stop it.
As I stated in a previous note, it is logged 5 seconds after the host
stops transmitting.  In a DECtalk (DTC01) V2.0 unit, you can prevent
this by entering setup mode and specifying SET LOCAL FILTER ON.  This
supresses logging of DECtalk-specific escape sequences to the local terminal.
This is described on page 26 of the -003 revision of the Owner's manual.
You can set this parameter from the host by transmitting the sequence:
    <ESC> P 0 ; 8 2 ; 3 2 z <ESC> \
This is described on page 63 of the -003 revision of the Programmer's manual.

DECtalk 3 (DTC03) does not support a local terminal.

My apologies for not clarifying this in my earlier posting.

Martin Minow
decvax!minow

The above does not represent the position of Digital Equipment Corporation.