Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bbn!rochester!rutgers!mit-eddie!uw-beaver!tektronix!tekcrl!tekfdi!videovax!stever
From: stever@videovax.Tek.COM (Steven E. Rice, P.E.)
Newsgroups: comp.sys.amiga
Subject: Re: BOBs and KS 1.2
Message-ID: <4582@videovax.Tek.COM>
Date: Fri, 18-Sep-87 11:47:17 EDT
Article-I.D.: videovax.4582
Posted: Fri Sep 18 11:47:17 1987
Date-Received: Sun, 20-Sep-87 11:49:23 EDT
References: <1987Sep16.132922.8847@sq.uucp>
Reply-To: stever@videovax.Tek.COM (Steven E. Rice, P.E.)
Organization: Tektronix Television Systems, Beaverton, Oregon
Lines: 18
Keywords: Losing situation.
Summary: Do you have additonal memory?

In article <1987Sep16.132922.8847@sq.uucp>, Hobie Orris (hobie@sq.uucp)
writes:

> 	I have just written a program using BOBs that does not display the BOB
> I ask it to display, but otherwise works just fine.  . . .  Being naturally
> suspicious from dealing too long with an Amiga, I booted my copy of KickStart
> 1.1 and ran the program again.  It worked exactly as intended.  So my 
> question is: what's different in BOBs between KS 1.1 and KS 1.2?

One question -- do you have additional memory on your Amiga?  If you were
not specifying the BOB's memory as CHIP memory, it would work OK on a V1.1
that didn't do an ADDMEM, but fail on a V1.2 that autoconfigured. . .

					Steve Rice

-----------------------------------------------------------------------------
new: stever@videovax.tv.Tek.com
old: {decvax | hplabs | ihnp4 | uw-beaver | cae780}!tektronix!videovax!stever