Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!psuvax1!vu-vlsi!cbmvax!andy
From: andy@cbmvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: CTL-C .. anybody know how to...
Message-ID: <2394@cbmvax.UUCP>
Date: Sat, 26-Sep-87 22:13:56 EDT
Article-I.D.: cbmvax.2394
Posted: Sat Sep 26 22:13:56 1987
Date-Received: Sun, 27-Sep-87 22:09:07 EDT
References: <8709260241.AA18897@cory.Berkeley.EDU>
Reply-To: andy@cbmvax.UUCP (Andy Finkel)
Organization: Commodore Technology, West Chester, PA
Lines: 35

In article <8709260241.AA18897@cory.Berkeley.EDU> dillon@CORY.BERKELEY.EDU (Matt Dillon) writes:
>
>	I would like to get SIGBREAKF_CTRL_[CDEF] working before I release
>the next DME version.  Anybody know how to do it from a console.device
>or plain intuition window?
>
>					-Matt

Easy enoug...in your console/intuition window, you have
somewhere a place where you are doing a Wait() on multiple
signals, ie a line like:

WakeUpBit= Wait((1<<window->UserPort->mp_SigBit)|(1<<consoleMsgPort.mp_SigBit));

This line waits a signal from either Intuition  or the console.device.

Well, just add the SIGBREAKF_CTRL_C to the Wait(), ie

WakeUpBit= Wait((1<<window->UserPort->mp_SigBit)|(1<<consoleMsgPort.mp_SigBit)
        |SIGBREAKF_CTRL_C);


And that's all there is to it.

			andy

-- 
andy finkel		{ihnp4|seismo|allegra}!cbmvax!andy 
Commodore-Amiga, Inc.

"Interfere?  Of course we'll interfere.  Always do what you're best at,
 I always say."

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.