Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!hc!beta!cmcl2!rutgers!cbmvax!grr
From: grr@cbmvax.UUCP (George Robbins)
Newsgroups: comp.sys.amiga
Subject: Re: A2000
Message-ID: <2414@cbmvax.UUCP>
Date: Tue, 29-Sep-87 01:52:15 EDT
Article-I.D.: cbmvax.2414
Posted: Tue Sep 29 01:52:15 1987
Date-Received: Thu, 1-Oct-87 02:46:55 EDT
References: <1754@dino.cpe.ulowell.edu>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Organization: Commodore Technology, West Chester, PA
Lines: 17

In article <1754@dino.cpe.ulowell.edu> miner@dino.cpe.ulowell.edu (Rich Miner) writes:
> In article <2343@cbmvax.UUCP> grr@cbmvax.UUCP (George Robbins) writes:
> >  The SCSI driver currently [has a] provision for higher level software to 
> >pass random SCSI commands thru the driver to perform other functions. 
> >  I'm not sure how well this will be documented initially, but hopefully it
> >will be useful to get tape backup devices and such off the ground.
> 
> I am looking at a SCSI based page scanner from DataCopy, think we will have
> a problem getting this to talk to your SCSI interface?

It should be possible, but that doesn't make it easy...  Perhaps contact Andy
and see if you can be the first victim and get a little extra support...

-- 
George Robbins - now working for,	uucp: {ihnp4|rutgers|allegra}!cbmvax!grr
but no way officially representing	arpa: out to lunch...
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)