Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!uwvax!uwmacc!uwmcsd1!csd4.milw.wisc.edu!dave
From: dave@csd4.milw.wisc.edu (David A Rasmussen)
Newsgroups: comp.sys.amiga
Subject: A2000 discoveries
Message-ID: <3149@uwmcsd1.UUCP>
Date: Sun, 11-Oct-87 22:57:45 EDT
Article-I.D.: uwmcsd1.3149
Posted: Sun Oct 11 22:57:45 1987
Date-Received: Tue, 13-Oct-87 01:02:24 EDT
Sender: daemon@uwmcsd1.UUCP
Reply-To: dave@csd4.milw.wisc.edu (David A Rasmussen)
Distribution: na
Organization: Computing Services Division, UW Milwaukee
Lines: 23

Looked at the inside of my 2000 over the weekend. This revealed a screw
missing from the 5.25" bezel which rolled out from somewhere after I
tilted the unit around a few times. The other problem is that the disk
led never lights, unless I ground it. I don't want to send my machine back
to the store. Oh well....

Looks like a nice job of work on the inside though.

My main board also lists B2000, but I don't remember which revision at
the moment. I notice the schematic in the manual looks like a 512k
motherboard, and the picture of the mouse ("push the door forward to
remove the ball") doesn't work on my mouse, which rotates off. Do I
have the wrong book, and if so, how can I get the right one?

Finally, I'm interested in hearing more about sharing resources
between the bridge card/pc side and the amiga side. For instance,
if I only want to use the pc stuff moderately, can I access an
amiga-side disk from the bridgecard, or am I better off with an
amiga partition on a pc disk?
Dave Rasmussen c/o Computing Services Division @ U of WI - Milwaukee
Internet: dave@csd1.milw.wisc.edu  Uucp: uwvax!uwmcsd1!dave    {o,o}
Csnet:	  dave%uwmcsd1@uwm	   Bellnet: +1 (414) 229-5133   \u/
ICBM: 43 4 58 N/ 87 55 52 W  Usnail: 3200 N Cramer #E380, Milw WI 53211