Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!uw-beaver!apollo!weber_w
From: weber_w@apollo.uucp (Walt Weber)
Newsgroups: comp.sys.apollo
Subject: Re: Using RSH instead of CRP -- or better yet, UUX...
Message-ID: <376fa0af.1f6@apollo.uucp>
Date: Tue, 22-Sep-87 17:06:00 EDT
Article-I.D.: apollo.376fa0af.1f6
Posted: Tue Sep 22 17:06:00 1987
Date-Received: Thu, 24-Sep-87 07:23:56 EDT
References: <6941@eddie.MIT.EDU>
Reply-To: weber_w@apollo.UUCP (Walt Weber)
Organization: Apollo Computer, Chelmsford, MA
Lines: 22
Keywords: RSH, UUX, remote process, Apollo ring

In article <6941@eddie.MIT.EDU> rich@eddie.MIT.EDU (Richard Caloggero) writes:
>
>     Can I use RSH, or better still UUX, to create remote processes on
>other nodes connected to the Apollo ring?

As John Hays stated, bsd4.2 rsh(1) can be used providing that tcp/ip has
been correctly installed on all involved nodes.

The current (bsd4.2 or sys5/Release 2) versions of uucico do not provide a
protocol driver for anything other than serial lines. (uucico is the program
which uux uses to do the transfer of files between machines, and to invoke
the command via another program, uuxqt.)

There is an excellent version of uucp (commonly called HoneyDanBer) which is
included with sys5 Release 3 which has a very rich set of protocol drivers,
but this is not in widespread distribution within the uucp user community.

...walt...
-- 
Walt Weber               PHONE: (617) 256-6600 x7004
Apollo Computer          GENIE: W.WEBER
Chelmsford, People's Republic of Massachusetts