Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!nosc!cod!medin
From: medin@cod.UUCP (Ted Medin)
Newsgroups: comp.sys.apple
Subject: Re: VT-100
Message-ID: <838@cod.UUCP>
Date: Tue, 29-Sep-87 11:48:25 EDT
Article-I.D.: cod.838
Posted: Tue Sep 29 11:48:25 1987
Date-Received: Thu, 1-Oct-87 04:18:57 EDT
References: <8709280935.aa01951@SMOKE.BRL.ARPA>
Reply-To: medin@cod.nosc.mil.UUCP (Ted Medin)
Distribution: world
Organization: Naval Ocean Systems Center, San Diego
Lines: 15

In article <8709280935.aa01951@SMOKE.BRL.ARPA> SEWALL@UCONNVM.BITNET writes:
>Kermit is now up to 3.79 (which isn't much different from 3.76 or
>3.78 except it fixes some bugs in the vt-100 emulation).  The VT-100
>is far from complete.  It's ok for using on an IBM-CMS system (mainly
>to get on and transfer files), but I suspect trying to use it with
>as a general purpose vt-100 is likely to reveal its limitations.
>
 I regularly use 3.79 on unix full screen editors vi & jove also on 
vms eve & edt. If 3.79 vt100 mode doesnt work correctly on these full
screen editors i would like to know about it. As far as i can tell it
bats 100% on unix & vms. It is not complete just whats necessary
and it is slow. 4800 baud is about as fast as it
will go and unless you have an //e+ or gs (i think) you will need flow
control or slower baud.
                                                Ted