Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!husc6!bloom-beacon!think!ames!ucbcad!ucbvax!UNO.BITNET!SJDMK
From: SJDMK@UNO.BITNET.UUCP
Newsgroups: comp.sys.apple
Subject: Kermit initialization under ProDOS...
Message-ID: <8710021356.aa03194@SMOKE.BRL.ARPA>
Date: Fri, 2-Oct-87 13:48:00 EDT
Article-I.D.: SMOKE.8710021356.aa03194
Posted: Fri Oct  2 13:48:00 1987
Date-Received: Sun, 4-Oct-87 07:18:42 EDT
Sender: usenet@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 27

I've had v3.78 for some time now but never bothered to set up the files
KERMIT.INIT and KERMIT.MODEM. I didn't really have the time to read all
the documentaion to see what they did so I never did. Now that I have
v3.79 I decided to do it.

Now for the problem. While using DOS 3.3, everything is fine. When I
transferred Kermit over to a ProDOS disk I got an error:

PRODOS ERROR & CALL ADDRESS: $40 5010
INVALID PATHNAME

*** the '$' was inverted.

The only thing I can figure is that Kermit needs to have the prefix set but
you can't do that since it trys to read the file before you try to set the
prefix.

Any ideas?

Are my assumptions correct?

Thanks,

                       Steve

BITnet:  SJDMK@UNO
ARPAnet: EDU%"SJDMK%UNO.BITNET@WISCVM.WISC.EDU"