Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!genrad!decvax!decwrl!ucbvax!UKANVAX.BITNET!2QZNHONE
From: 2QZNHONE@UKANVAX.BITNET
Newsgroups: comp.sys.apple
Subject: Getting Apple2-l filelist
Message-ID: <8710050051.aa08156@SPARK.BRL.ARPA>
Date: Mon, 5-Oct-87 01:47:00 EDT
Article-I.D.: SPARK.8710050051.aa08156
Posted: Mon Oct  5 01:47:00 1987
Date-Received: Mon, 12-Oct-87 03:05:11 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 28

Date:     Sun,  4 Oct 1987 22:51:51.80 CST
From:     <@VM.CC.PURDUE.EDU:2qznhone@ukanvax.bitnet>
Subject:  RE: apple2-l@brownvm
To:       <bwu@s.cc.purdue.edu>

The only way I know how to get the list of files is when using Bitnet:

On Vax computer:

SEND LISTSERV@BROWNVM INDEX APPLE2-L

On IBM:

TELL LISTSERV AT BROWNVM INDEX APPLE2-L

Once you have received the list (usually within the next day), to get a
file just use this command (substituting the file number 00xxx):

SEND LISTSERV@BROWNVM.bitnet GET APPLE2-L 87-00xxx

Be sure you use BROWNVM.bitnet in all commands I left it out in the
first two commands above.

That should do it!

Todd
2QZNHONE@UKANVAX.BITNET
University of Kansas