Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!pete
From: pete@utgpu.UUCP
Newsgroups: comp.sys.atari.st
Subject: 5.25" Drive Connections...
Message-ID: <1987Sep24.233101.27244@gpu.utcs.toronto.edu>
Date: Thu, 24-Sep-87 23:31:01 EDT
Article-I.D.: gpu.1987Sep24.233101.27244
Posted: Thu Sep 24 23:31:01 1987
Date-Received: Sat, 26-Sep-87 12:47:19 EDT
Reply-To: pete@gpu.utcs.UUCP (Peter Santangeli)
Distribution: na
Organization: University of Toronto Computing Services
Lines: 20
Keywords: PC_DITTO Disk Drive
Checksum: 43069

	Hi Yall!
	I am considering picking up  a copy of PC Ditto. I have tried
it at a freinds and am satisfied with the speed. I have a Tandon TM100-2A
sitting around here collecting dust, and would like to hook it up to my
external drive port. I can  rig a cable well enough, and am very capable
of buffering the lines, BUT!! I don't know the Edge Pinout of the 
5.25" drive! So making a cable is a lot more difficult!
	Can anybody help me out by sending me the pinouts???

	Thanks,
	Pete.

* Note:
* I realize I will probably get !!BLASTED!! on the net for this anouncment,
* but I am afraid my ST version of UW remains Vapour Ware for the moment.
* Educational pressures (6 full U of T courses) and work pressures (2 part
* time jobs) along with a busy summer have forced me to put the project
* on the Back Back Back burner. I realize that this is no excuse for the sin
* of vapour-ware'ing, and for this I humbly appologize.
* flames to /DEV/NILL please.