Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!linus!philabs!sbcs!lean
From: lean@sbcs.UUCP (Lean L. Loh)
Newsgroups: comp.sys.atari.st
Subject: problem with zm/rz/sz program in Unix 4.3
Message-ID: <612@sbcs.UUCP>
Date: Thu, 24-Sep-87 12:59:37 EDT
Article-I.D.: sbcs.612
Posted: Thu Sep 24 12:59:37 1987
Date-Received: Sun, 27-Sep-87 12:00:31 EDT
Distribution: comp
Organization: Computer Science Dept, SUNY@Stony Brook
Lines: 14


 I've compiled the zm/rz/sz (Xmodem,Ymodem,Zmodem) program on our Unix 4.3
running on a VAX780, and have not been able to get it to work. After
initiating a rz filename, I issued a send file from my terminal program,
but it always timeout with a message <transfer canelled by receiver>.
Doing a sx -X filename on the VAX, and then doing a receive on my terminal
program would result in nothing getting tranfered and also hanging up the
VAX side usually.  I tested this with 3 different terminal program that I have
used successfully in the past (only using Xmodem protocol).  Any advise??
 Much thanks in advance.
-- 
CSNET: lean@sbcs.csnet
ARPA: lean%suny-sb.csnet@csnet-relay.arpa
UUCP: {allegra, hocsd, philabs, ogcvax}!sbcs!lean