Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!mcvax!nikhefk!paulm
From: paulm@nikhefk.UUCP (Paul Molenaar)
Newsgroups: comp.sys.atari.st
Subject: Re: magic sac,finder5.5,hypercard
Message-ID: <250@nikhefk.UUCP>
Date: Tue, 6-Oct-87 06:29:19 EDT
Article-I.D.: nikhefk.250
Posted: Tue Oct  6 06:29:19 1987
Date-Received: Fri, 9-Oct-87 03:55:34 EDT
References: <5525@drutx.ATT.COM>
Reply-To: paulm@nikhefk.UUCP (Paul Molenaar)
Distribution: comp
Organization: Nikhef-K, Amsterdam (the Netherlands).
Lines: 27
Keywords: atari.st,magic sac

In article <5525@drutx.ATT.COM> nick@drutx.ATT.COM (SilvaN) writes:
>The latest issue of the Data Pacific newsletter shows that the latest
>system (4.1?) and finder (5.5) will work on the sac. I tried moving both over
>to the st (800k disk needed this time) but with poor results. I could get the
>finder to launch ok if I had previously booted from another disk, but the
>new system would not boot. Has anyone had any success with the new system and
>finder? - and if so please tell me how you did it. 

Friends of mine succeeded in running Finder 5.5, but using an older
system (like 3.2 or whatever)

>
>Has anyone tried Hypercard on the sac yet? I have access to it, I'm just 
>wondering if its worth moving 800k worth of stuff over.
>
What a disappointment... HyperCard needs 1 meg of memory or more. It even
runs out of memory (occasionally) on my Mac SE :>
You might wanna go for the real thing ;)

Paul Molenaar

"Just checking the walls"
	-Basil Fawlty-

:
:
: