Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!bloom-beacon!oberon!cit-vax!ucla-cs!zen!ucbvax!wmcs.UUCP!csrobe From: csrobe@wmcs.UUCP (Chip Roberson) Newsgroups: comp.sys.atari.st Subject: BSD4.2 Script command wanted. Message-ID: <8710080018.AA05088@wmcs.uucp> Date: Wed, 7-Oct-87 20:18:30 EDT Article-I.D.: wmcs.8710080018.AA05088 Posted: Wed Oct 7 20:18:30 1987 Date-Received: Sat, 10-Oct-87 16:59:48 EDT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 20 Does anyone have a command like script that is available on BSD4.2. What i need is something that works to capture all input and output between when i start the script file and when i finish it. I would prefer something that would work with MWC msh or gulam. Also, why are there problems with redirecting standard output in these shells? Anything redirected from a MWC program is ok in msh but try that with OSS Personal Pascal programs and you get a file full of MMM's. Who knows what I'm going to do with XLISP? Any and all suggestions would be greatly appreciated! thanks, -chip ------------------------------------------------------------------------- Chip Roberson ARPANET: csrobe@icase.arpa 1105 London Company Way BITNET: $csrobe@wmmvs.bitnet Williamsburg, VA 23185 UUCP: ...!uunet!pyrdc!gmu90x!wmcs!csrobe ------------------------------------------------------------------------- *(*please note change in UUCP address ^^^^^^^^^^^ seismo is gone*)*