Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!beta!hc!ames!ptsfa!pttesac!robert
From: robert@pttesac.UUCP (Robert Rodriguez)
Newsgroups: comp.sys.att
Subject: Using the modem on the 3B1 (7300)
Message-ID: <510@pttesac.UUCP>
Date: Thu, 17-Sep-87 00:32:52 EDT
Article-I.D.: pttesac.510
Posted: Thu Sep 17 00:32:52 1987
Date-Received: Sun, 20-Sep-87 05:34:01 EDT
Reply-To: robert@pttesac.UUCP (Robert Rodriguez)
Organization: Pacific*Bell ESAC, San Francisco, Ca.
Lines: 9
Keywords: dial(3C), modem, 7300

Summary:


I'm trying to use the dial(3C) function on the 3b1
and I'm having a few problems.  Has anyone out there
used this before.  The "Interface Specification" that
came with the 3B1 says to use dial() over ioctl() calls,
but then goes on to only give an example using ioctl.

Could someone post an example ?

Thanks in advance, Robert