Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!mcnc!ece-csc!ncrcae!ncr-sd!hp-sdd!megatek!mana!hollen
From: hollen@mana.UUCP
Newsgroups: comp.sys.att,comp.sys.ibm.pc
Subject: Re: AT&T PC Mouse & MS Codeview incompatibility ?
Message-ID: <186@megatek.UUCP>
Date: Wed, 30-Sep-87 16:55:09 EDT
Article-I.D.: megatek.186
Posted: Wed Sep 30 16:55:09 1987
Date-Received: Sat, 3-Oct-87 02:02:46 EDT
References: <1020@houxa.UUCP>
Sender: news@megatek.UUCP
Reply-To: hollen@mana.UUCP (Dion Hollenbeck)
Organization: Megatek Corporation, San Diego, Ca.
Lines: 15
Keywords: AT&T PC, Mouse, Codeview
Xref: utgpu comp.sys.att:1172 comp.sys.ibm.pc:7366

In article <1020@houxa.UUCP> ejy@houxa.UUCP (E.YUREK) writes:
>
>	I have an AT&T PC6300 with the AT&T mouse, am trying to
>	use MS Codeview in window mode, and can't get a mouse
>	cursor on the screen.

You don't mention it, but if the AT&T mouse is really a Mouse Systems
mouse (since they buy the 6300 from Olivetti, they probably buy the mouse
too) I not only have the same problem, but a solution.  The Mouse Systems
mouse needs version 5.3 of the MSMOUSE software.  Hope this is of some
help.

	Dion Hollenbeck             (619) 455-5590 x2814
	Megatek Corporation, 9645 Scranton Road, San Diego, CA  92121
	{ sdcsvax!sdcc6 | hp-sdd | seismo!s3sun } !megatek!hollen