Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!topaz.rutgers.edu!trudel
From: trudel@topaz.rutgers.edu (Jonathan D.)
Newsgroups: comp.sys.cbm
Subject: 6480 modem woes
Message-ID: <14897@topaz.rutgers.edu>
Date: Sun, 20-Sep-87 18:24:30 EDT
Article-I.D.: topaz.14897
Posted: Sun Sep 20 18:24:30 1987
Date-Received: Sun, 20-Sep-87 23:44:39 EDT
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 19
Keywords: volksmodem


A friend of mine recently bought one of these suckers, and is 
having problems with it.  He can't log into Compuserv at 1200 
baud with any regularity.  I've sat down with him and have been able
to log into my system, so I know it is working at 1200 baud.
The terminal program isn't all that wonderful (I believe thatit's the
one that came with the modem - Com Term or some such), and doesn't do 
much besides set parameters and initiate dialing.

What I'd like to know is what are the commands for the modem - Are they
simple?  Is it possible to use a program like kermit or term.plus and
have him type the modem commands himself, or is he trapped into using
the supplied program (which does zero terminal emulation)?

Any help would be appreciated.  Thanks.

						Jon
-- 
Hm-m-m-mm?  I thought this place was for Brontosaurusses only!?!!?!!